Servers come in a number of physical form factors or packaging, including:
By submitting your email address, you agree to receive emails regarding relevant topic offers from TechTarget and its partners. You can withdraw your consent at any time. Contact TechTarget at 275 Grove Street, Newton, MA.
- Tower: The simplest servers, such as high-end PCs, are provided in tower cases and share similar restrictions in their extensibility.
- Rack-mount: Larger servers often take rack-mount form. This is a standard, 19-inch wide enclosure that is some multiple of 1.75 inches tall and designed to be mounted into a larger enclosure termed a rack, which allows a site to create an appropriate mix of server configurations. A rack generally integrates some number of services such as power, storage and network connections.
- Blade: As the technologies used to fabricate components in building server computers has evolved, those components have become more integrated and substantially smaller. This allowed a server to be built on a single board so a rack-mount-sized enclosure could hold many such boards, each with its own processing, memory, network and (minimal) storage. This led to a new form factor for servers: blades. The developing trend is that blades will encroach and take over rack-mount form factors.
Here is a brief summary of these physical form factors and where to use them:
- The tower form factor is used for low-capacity servers where scalability beyond two towers is not needed.
- The rack-mount form factor is used to provide servers of substantial capability and multiple nodes, with each node itself being highly capable and configurable.
- The blade form factor is best suited for servers containing large numbers of nodes of limited capability, each of which typically builds on PC technology with its low cost and small size.
The following table further describes and compares these three packaging options.
|What it is||A collection of server components (processors, memory, I/O controllers and sometimes some peripherals) integrated within a compact floor-standing unit.||A 19"-wide rack into which can be inserted either servers or storage in any mix; the installable units come in heights that are a multiple of 1.75 inches ( "1U"); the maximum height of a rack is 42U.||An enclosure equipped to allow a fairly large number of PCI-format cards to be installed within it. Each card is itself a computer system providing processors, memory, network connections and storage connections, a typical configuration being up to four processors, memory, and one or two hard disks for local storage.|
|What it looks like||
Figure 1 - Example of the Tower form factor (Dell PowerEdge 6800)
Figure 2 - Example of the rack mount form factor (HP 9000)
Figure 3 - Example of the blade form factor (IBM BladeCenter)
|Where to use it||Use a tower system when low cost is a priority, fairly minimal configurations are suitable, scalability is limited and your need for connections to storage or the network is limited.
Physical footprint is small.
Physical footprint is moderate.
|Use a blade system when each node has to be of reasonably small capacity (in terms of number of processors, memory size, storage capacity, etc.), when the overall server configuration should encompass an average to a large number of nodes, and when scalability is important.
Physical footprint is fairly small.
About the authors:
René J Chevance is an independent consultant. He formerly worked as chief Scientist of Bull, a European-based global IT supplier.
Pete Wilson is Chief Scientist of Kiva Design, a small consultancy and research company specializing in issues surrounding the move to multi-core computing platforms, with special emphasis on the embedded space. Prior to that, he spent seven years at Motorola/Freescale.
More information from SearchWinComputing.com
- Tip: Adding a server to your infrastructure
- Topic: Server Management
- RSS: Sign up for our RSS feed to receive expert advice every day.