Specify drivers that are not on your NT setup CD

When installing NT 4.0 on a server that has devices without drivers on the CD, press "F6" at the "Inspecting hardware" phase.

This tip was submitted to the SearchWin2000 Tip Exchange by member Derrick Lipp. Let other users know how useful...

it is by rating the tip below.


If you're installing NT 4.0 on a server that has devices such as SCSI adapters, and you do not have drivers on the NT 4.0 setup CD, just press the "F6" key when setup is at the "Inspecting hardware" phase. You will then have the option to specify other drivers that are not on the CD.
This was first published in June 2002
This Content Component encountered an error

PRO+

Content

Find more PRO+ content and other member only offers, here.

0 comments

Oldest 

Forgot Password?

No problem! Submit your e-mail address below. We'll send you an email containing your password.

Your password has been sent to:

-ADS BY GOOGLE

SearchServerVirtualization

SearchCloudComputing

SearchExchange

SearchSQLServer

SearchWinIT

SearchEnterpriseDesktop

SearchVirtualDesktop

  • Virtual desktop security guide

    To secure virtual desktops, consider antivirus, certificates and network vulnerabilities. Just remember, VDI doesn't always ...

  • Guide to low-cost desktop virtualization

    In this guide, learn to virtualize desktops without spending more than you would when deploying PCs, and what VDI vendors are ...

  • VDI pilot project guide

    A VDI pilot project should start with a VDI project plan. Know what pitfalls to avoid and test product options to achieve a ...

Close