Manage Learn to apply best practices and optimize your operations.

Exchange 2007 memory and hardware configuration best practices

Find out what the best memory and hardware configuration is for a 64-bit Exchange Server 2007 installation.

When it comes to a 64-bit architecture, more isn't always better. Find out what Microsoft says is the best memory and hardware configuration for an Exchange 2007 installation.

A commonly repeated adage about Exchange Server memory is "more is better." The more memory you have, the less likely Exchange Server will experience bottlenecks and the faster things will run.

Exchange 2007 is all the more powerful on systems with more than 4 GB of RAM, thanks to its 64-bit architecture. So it would seem to make sense to throw as much memory as is physically possible at a given 64-bit Exchange installation, right?

That's the theory, but the practice -- especially when it comes to Exchange Server 2007 -- is a little different.

In Microsoft's article about Exchange Server 2007 hardware, "Planning processor and memory configurations," there are a number of surprises regarding the best memory configurations for a 64-bit Exchange installation. One is the revelation that 32 GB is the most cost-effective memory configuration for Exchange 2007 boxes.

This is not a limitation of Exchange 2007, but an observation about how cost-effective that much memory in a given Exchange Server will be, and how expensive it is to buy the required hardware.

An Exchange 2007 system's memory bus architecture may impose speed limits based on how much memory is installed. A system with 16 GB of PC3200 memory can support 32 GB of memory, but only at PC2700 speeds (so having more memory may be offset by the fact that it's slower).

Another hardware consideration is that a given Exchange 2007 server may work better when more memory slots are filled vs. having denser memory modules in fewer slots.

Microsoft breaks down recommended memory allocations for Exchange 2007 servers based on their roles. For example, a mail server will probably need 2 GB plus 2 MB to 5 MB per mailbox, with a recommended maximum of 32 GB.

More on Exchange Server 2007 hardware and memory:
Architectural changes in Exchange Server 2007

Exchange Server 2007: 32-bit versus 64-bit hardware

Exchange memory management with /3GB, /USERVA and /PAE

Step-by-Step Guide: How to spec your Exchange hardware needs

Exchange 2007 Reference Center

Exchange Server Hardware Management Reference Center
By those calculations, a 32 GB mail server could comfortably support over 6,000 users. Assuming heavy usage, 32 GB may be overkill for many organizations.

There are two caveats:

  1. These estimates don't take into account third-party applications that might be running on the same Exchange server.
  2. It assumes fairly sane mailbox usage -- i.e., you're not allowing people to have 5 GB mailboxes or something equally absurd.

For my own edification, I went to Dell's site to spec two separate servers: one that scaled to 64 GB of RAM and another that only scaled to 32 GB. The first had memory speeds that topped out at 400 MHz (DDR2). The second went up to 667 MHz (DDR2) and started at far less of a price.

About the author: Serdar Yegulalp is editor of Windows Insight, a newsletter devoted to hints, tips, tricks, news and goodies for all flavors of Windows users.

Do you have comments on this tip? Let us know.

Please let others know how useful this tip was via the rating scale below. Do you know a helpful Exchange Server, Microsoft Outlook or SharePoint tip, timesaver or workaround? Email the editors to talk about writing for

Dig Deeper on Exchange Server setup and troubleshooting

Start the conversation

Send me notifications when other members comment.

Please create a username to comment.