Now that the two servers are ready to act as nodes in a Windows 2003 cluster, it's time to create the actual Windows...
2003 Server Cluster. To do so:
- Log onto EDFS07 with a domain admin account, then click Start -> Administrative Tools -> Cluster Administrator, and select Create new cluster in the drop-down box. Click OK and then click Next, as shown in Figure 8.41.
|Note: You can also open a command prompt and type Cluster.exe /create /wizard to start the Cluster Wizard.|
- Now specify the domain name as well as the cluster name (the name for the Windows 2003 cluster, not the Exchange cluster name to which the clients will connect) as shown in Figure 8.42, then click Next.
- If it's not already entered, type the name of the Windows 2003 server that is to be the first node in the cluster (in this case, EDFS07), then click Next (see Figure 8.43).
- Let the Cluster Wizard determine the cluster configuration and click Next.
|Note: You can ignore the two warnings shown in Figure 8.44, since the nodes in a cluster continuous replication-based mailbox server setup aren't going to share the same disk subsystem.|
- Now enter the IP address that the cluster management tools should use to connect to the cluster (in this case, 10.10.1.218) and click Next (see Figure 8.45).
- Enter the credentials of the cluster service account and click Next (see Figure 8.46).
- Now click Quorum and select Majority Node Set as the resource type, then click OK and Next (see Figures 8.47 and 8.48).
|Note: The Majority Node Set resource type manages cluster configuration data that might or might not be on a cluster storage device. For example, the Majority Node Set resource type can manage cluster configuration data that is actually stored on multiple nodes in a cluster at the same physical location or in a geographically dispersed cluster. The Majority Node Set resource ensures that the cluster configuration data is kept consistent across the various nodes.|
- Now wait for the cluster to be configured, then click Next (see Figure 8.49).
- When the cluster has been completed successfully, you can click Finish.
We now have a full working Windows 2003 cluster running, but since there's only one node, it's not very fault tolerant. So let's add the second Windows 2003 server too. Do the following:
- Right-click EDFS07 in the left pane of the Cluster Administrator, then selecting New -> Node, as shown in Figure 8.50.
- The Add Nodes Wizard will launch and you can click Next. Enter the name of the server that is going to be the second node (for the purpose of this example, EDFS08), then click Next (see Figure 8.51).
- Again, let the Add Notes Wizard determine the cluster configuration, then click Next (see Figure 8.52).
- Enter the password for the cluster service account (in this case, svc-cluster, which we created earlier in the chapter), then click Next (see Figure 8.53).
- When you are verified, you'll want to add the second node to the cluster with the configuration shown in Figure 8.54. Click Next.
- When the cluster has been configured properly without any errors or warnings (see Figure 8.55), click Next.
- When the Add Notes Wizard has completed successfully, click Finish.
The second Windows server is now part of the cluster, as shown in Figure 8.56.
Installing the Necessary Windows Components
Before we move on to install the Exchange Server 2007 binaries, we need to make sure that the required Windows components have been installed. All types of Exchange Server 2007 installations (no matter what server role we're talking about) need the Microsoft .NET Framework 2.0 component installed.
If you have installed Windows Server 2003 Enterprise Edition with Service Pack 1 on the nodes, you need to download the Microsoft .NET Framework Version 2.0 Redistributable Package (x86) from Microsoft.com, since it's only a standard Windows component for Windows Server 2003 R2. If you're using Windows Server 2003 R2-based servers, you can install the component by clicking Start -> Control Panel -> Add or Remove Programs -> Add/Remove Windows Components, checking the Microsoft .NET Framework 2.0 check box as shown in Figure 8.57, then clicking Next.
Since we're deploying a clustered mailbox server, we also need to install the following IIS 6.0 components on each node:
- Enable network COM+ access
- Internet Information Services
- World Wide Web Service
When you have done so, you can move on to configure the File Share Witness.
Managing an Exchange 2007 Cluster Continuous Replication (CCR) setup
Part 1: Exchange 2007 Cluster Continuous Replication requirements
Part 2: Setting up Cluster Continuous Replication in Exchange 2007
Part 3: Creating a Windows 2003 cluster for an Exchange 2007 CCR setup
Part 4: Using a file share witness with Exchange 2007 CCR
Part 5: Enable the Transport Dumpster on the Hub Transport server
Part 6: Installing Exchange 2007 on the active node and passive node
Part 7: Testing clustered mailbox server functionality in a CCR setup
Part 8: Exchange 2007 Cluster Continuous Replication (CCR) setup overview
|This chapter excerpt from How to Cheat at Configuring Exchange Server 2007: Including Outlook Web, Mobile, and Voice Access , by Henrik Walther, is printed with permission from Syngress, a division of Elsevier, Copyright 2007.
Click here for the chapter download.